Skip to main content

Edit the advanced settings

🔐 Prerequisites​

  • Interface: Web only
  • Rights: User_admin / User_client

🎯 Purpose of the feature​

The purpose of the ‘Monitoring‘ tab is to customise your alerts by managing your tresholds and parameters.

📝 Step by step procedure​

  1. Click on the ‘Monitoring‘ tab in the ‘Configuration‘ section of the left-hand side menu.
  2. Select the water network of your choice using the selector at the top right of your screen.
  3. In the menu at the top left, select tab ‘Advanced settings‘
  4. Edit your settings.
    • Time during which alerts are not relevant: As your network pressure increases or decreases, pressure anomalies may be detected, but you may want to ignore them to avoid being overwhelmed with alerts. You can therefore deactivate the following alerts during the time of the increase and decrease in pressure in your network: Low pressure / Overpressure / Missed irrigation start / Failed to close / Premature irrigation stop / Unplanned irrigation.

 

Last update: 29/09/25